Introduction
The liquid cooling market is crowded with flashy options, often loaded with RGB lighting and aesthetic flourishes. But not every builder wants or needs that. For those who care only about raw cooling efficiency and reliability, the AI360 from ProLab Design is built with a singular focus: performance. With a triple-fan 360mm radiator, broad platform support, and a design stripped of gimmicks, this AIO targets enthusiasts who want their cooler to work hard without drawing attention to itself.
Unboxing & First Impressions of AI 360
The ProLab AI360 arrives in functional, minimal packaging that immediately sets the tone for what this product is about. Inside, the layout is neat and secure, with protective inserts keeping the radiator, pump, and fans in place.
Included in the box:
- 360mm radiator with pre-attached sleeved tubing
- Three 120mm PWM fans
- Intel and AMD mounting hardware
- Pre-applied thermal paste
- Installation guide
The first impression is one of sturdiness and practicality. The radiator feels dense and well-constructed, the tubing is reinforced yet flexible enough for easy routing, and the fans are utilitarian in design—clearly optimized for airflow and static pressure rather than looks. There are no lighting zones, no flashy accents—just hardware built for the job.
Installation & Compatibility
The ProLab AI360 uses a universal backplate mounting system that supports Intel’s LGA1700/1200/115X sockets as well as AMD’s AM5 and AM4 platforms. The manual is well drafted, and the labeled brackets and parts help prevent mistakes during installation.
With a 27mm-thick radiator, the AI360 should fit into most mid- and full-tower cases that accommodate 360mm radiators. The tubing length offers enough flexibility for either front or top mounting, and cable management is relatively simple since there are only PWM fan leads to consider—no ARGB splitters or lighting cables to clutter the build.
Even for a first-time liquid cooler installer, setup should take no more than 30 minutes.
Test Bench
The ProLab AI360 was evaluated on the following hardware configuration:
- CPU: Ryzen 5 5600
- Motherboard: Asus TUF Gaming X570 Plus
- RAM: Kingston Renegade Fury 3200 C16 * 16GB
- GPU: RTX 3050
- Case: Lian LI O11 Dynamic
- Ambient Temperature: 30°C
Testing included idle, gaming, and synthetic stress workloads, with fan speeds controlled via both auto-PWM profiles and fixed RPM settings.
Performance
At idle, the AI360 keeps CPU temperatures close to ambient, showing its efficiency even at low fan speeds. Under heavy synthetic stress tests, it manages to keep Ryzen 5 5600 below 65°C, demonstrating cooling capacity.
Under our 30 °C ambient testing environment, the ProLab Design AI 360 maintains excellent thermal performance across a variety of coolers. Even under sustained Cinebench R23 multicore load, 360 mm AIO offering the lowest peak temperatures. This means this cooler will have more thermal headroom under more stringent workload and overclocked scenarios.
| Cooler | Load Temp (°C) |
|---|---|
| DeepCool LD240 (240 mm AIO) | 69 |
| Noctua NH-D12L (Tower with Single Fan) | 72 |
| Noctua NH-L12Sx77 (Low-profile) | 79 |
| Noctua NH-D15 G2 LBC (High-end Tower) | 68 |
| ProLab Design AI 360 | 65 |
In gaming scenarios, the cooler balances fan ramp-up smoothly, preventing sudden noise spikes. At full load, the fans are audible but not distracting, producing a steady hum rather than harsh turbulence. Noise levels remain acceptable for a 360mm setup focused purely on airflow.
The takeaway is simple: the AI360 is built for thermal headroom. It will easily handles high-core-count processors and overclocked setups, making it a dependable choice for enthusiasts who push their hardware.
Note: When interpreting these results, it’s important to recognize that a 240 mm and a 360 mm AIO do not compete in the same bracket. A 360 mm cooler benefits from 50% more radiator surface area and additional airflow headroom, which naturally translates to lower thermals. The DeepCool LD240’s results are therefore best understood within the 240 mm class, where it remains highly competitive. The ProLab Design AI360 numbers are included for context, not as a one-to-one comparison, and simply illustrate what users can expect if they move up to a larger radiator size.
Design & Build Quality
The AI360 embraces a minimalist approach. There’s no RGB, no logos glowing through tempered glass—just clean black finishes and solid construction. The pump housing is functional, not ornamental, and the fans are plain but effective.
This understated design will appeal to builders who prefer a stealthy rig or professional workstation look. The lack of extra features also reduces points of failure, reinforcing the AI360’s “performance first” philosophy.
Conclusion
The ProLab AI360 is exactly what it sets out to be: a no-nonsense cooling solution for users who want dependable thermals without unnecessary frills. With strong performance, broad compatibility, and a durable design, it’s an ideal match for high-end CPUs and demanding workloads. While it lacks the visual flair of RGB-heavy competitors, that absence is precisely what makes it stand out for serious builders.
If you value cooling capacity and reliability over aesthetics, the AI360 is a cooler you can trust. Just pair it up with a good aftermarket thermal paste like the Thermal Grizzly Kryonaut or the likes.
Pros
- Excellent thermal performance with 360mm radiator
- Wide socket support (Intel & AMD)
- Simple installation process
- Durable build quality with sleeved tubing
- No unnecessary extras—pure function
Cons
- No software control or monitoring features
- Radiator size may be restrictive in compact cases
- Audible at maximum RPM (though expected for a 360mm AIO)
Verdict
The ProLab Design AI360 is a refreshing entry in today’s cooler market: practical, efficient, and focused purely on performance. For builders who want power without the distraction of RGB, it’s an easy recommendation.
A Gold for the New Comer!
Buying Link: Amazon
