Thermaltake Tempered Glass Edition Chassis Series

In the grand scheme of PC building, we can see a lot of manufacturers. But all of them does not speak the same, in terms of Quality Assurance and consistency. One name that ticks both the factors is Thermaltake. Thermaltake is a company which has consistently produced quality PC accessories. They have been a name in producing high-end PC Cases, Air Cooling solution, as well as Water Cooling Solutions. Recently the norm has not been any different.

Thermaltake, a leading brand in high-end PC components, today released the latest addition to the Core V Series and the Suppressor F-Series, the Core V71 Tempered Glass Edition Full Tower Chassis, Core V51 Tempered Glass Edition Mid Tower Chassis, and Suppressor F51 Tempered Glass Edition Mid Tower Chassis. With a 4mm thick tempered glass window, a riser GPU support bracket, and full assembly capacity and expandability for advanced water-cooled systems, the new Thermaltake Tempered Glass Edition Chassis Series is perfectly made for PC DIY enthusiasts. The enlarged window design with premium-quality guarantees the durability of the panel whilst allowing users to fully admire all components in the system. Whichever case you choose, the Tempered Glass Edition Chassis Series is designed with dual GPU placement layout that enables users to mount the GPUs horizontally or vertically. Inside the cases also come with a riser GPU support bracket. The bracket is used for preventing the graphic card from sagging when it is installed vertically. In addition, the Tempered Glass Edition Chassis Series features spacious interior for high-end system compatibility, supporting motherboards up to standard E-ATX, long graphic cards, multiple 3.5”/2.5” and 5.25” storage devices, and air/liquid cooling solutions.

Key Features of the Thermaltake Tempered Glass Edition Chassis Series

Core V71 Tempered Glass Edition Full Tower Chassis:

mainv71

4mm Thick Tempered Glass Window with Gorgeous View

The tempered glass features 4mm thickness that guarantees the durability of the window. Moreover, the enlarged window design delivers excellent viewing capability, permitting users to fully display every interior component of the system and show off their dedication and skill set.

Fully Modular Concept

The fully modular drive cages minimize the hassles of installation and removal. Especially, the tool-less drive bay design allows users to freely interchange the 3.5” and 2.5” hard-drives to suit their particular needs. Plus, the modular drive bay concept of “2+8” offers a good ratio for accessories and storage devices.

Riser GPU Support Bracket

Specially designed with dual GPU placement, the Core V71 TG has the support for vertical graphic card layout with dual PCI-E slots design. The included riser GPU support bracket not only can prevent the graphic card from sagging, but also helps to reduce the weight on the motherboard. The PCI-e riser cable is optional.

v71_1
                               Schematic Radiator Setup

Superior Expandability

Designed for high-end system compatibility, the Core V71 TG supports motherboards up to standard E-ATX, a dual expansion slot VGA of up to 400mm in length without HDD rack, and a tower CPU cooler as high as 185mm. Besides, the modular drive racks allow users to easily install up to eight 3.5”/2.5” (with HDD cage) and two 5.25” devices. Even with a high-wattage PSU stretching to 220mm in length, the Core V71 TG still leaves plenty of space for cable management.

Ideal for Advanced Cooling Solutions

Featuring a width of 230mm, the Core V71 TG enables users to build a complete high-end system that supports up to two 200mm case fan or up to one 420mm liquid cooling radiator. Additionally, to improve system ventilation, the CoreV71 TG comes with three 200mm LED fans (two at the front and one at the top) and one 140mm rear fan.

Schematic Fan Setup
                                    Schematic Fan Setup

Specification:

P/NCA-1B6-00F1WN-04
Case TypeFull Tower
Dimension (H x W x D)583 x 230 x 560 mm
(23 x 9.1 x 22 inch)
Net Weight14.7 kg
Side PanelTempered Glass
ColorExterior & Interior : Black
MaterialSPCC
Cooling SystemFront (intake) :
200 x 200 x 30 mm Blue LED fan (600~800rpm, 13~15dBA) x 2
Rear (exhaust) :
140 x 140 x 25 mm Turbo fan (1000rpm, 16dBA)
Top (exhaust) :
200 x 200 x 30 mm Blue LED fan (600~800rpm, 13~15dBA)
Drive Bays-Accessible
2 x 5.25’’
-Hidden
8 x 3.5’’ or 8 x 2.5’’
Expansion Slots8
Motherboards9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX), 12” x 13” (Extend ATX)
I/O PortUSB 3.0 x 2,USB 2.0 x 2, HD Audio x 1
PSUStandard PS2 PSU (optional)
LCS UpgradableSupports 1/2”、3/8”、1/4” water tube
Fan SupportFront:
1 x 120mm or 2 x 120mm or 3 x 120mm
1 x 140mm or 2 x 140mm
1 x 200mm or 2 x 200mm
Top:
1 x 120mm or 2 x 120mm or 3 x 120mm
1 x 140mm or 2 x 140mm
1 x 200mm or 2 x 200mm
Rear:
1 x 120mm or 1 x 140mm
Bottom:
1 x 120mm or 2 x 120mm
Radiator SupportFront:
1 x 120mm or 1 x 240mm or 1 x 360mm
1 x 140mm or 1 x 280mm or 1 x 420mm
Top:
1 x 120mm or 1 x 240mm or 1 x 360mm
1 x 140mm or 1 x 280mm or 1 x 420mm
Rear:
1 x 120mm
Bottom:
1 x 120mm or 1 x 240mm
OtherCPU cooler height limitation: 185mm
VGA length limitation:
310mm(with HDD rack)
480mm(without HDD rack)
PSU length limitation:
220mm (With Bottom Fan)

Core V51 Tempered Glass Edition Mid-Tower Chassis:

mainv51

4mm Thick Tempered Glass Window with Gorgeous View

The tempered glass features 4mm thickness that guarantees the durability of the window. Moreover, the enlarged window design delivers excellent viewing capability, permitting users to fully display every interior component of the system and show off their dedication and skill set.

Fully Modular Concept

The fully modular drive cages minimize the hassles of installation and removal. Especially, the tool-less drive bay design allows users to freely interchange the 3.5” and 2.5” hard-drives to suit their particular needs. Plus, the modular drive bay concept of “2+5” offers a good ratio for accessories and storage devices.

Riser GPU Support Bracket

Specially designed with dual GPU placement, the Core V51 TG has the support for vertical graphic card layout with dual PCI-E slots design. The included riser GPU support bracket not only can prevent the graphic card from sagging, but also helps to reduce the weight on the motherboard. The PCI-e riser cable is optional.

Schematic Radiator Setup
                                Schematic Radiator Setup

Excellent Expandability

The Core V51 TG supports motherboards up to standard E-ATX, a tower CPU cooler with maximum height 185mm, and a dual expansion slot VGA of up to 480mm in length without HDD rack. The Core V51 TG still leaves plenty of interior space for cable management even after installing a high-wattage PSU. Moreover, with the tool-free design, users can easily mount up to five 3.5”/2.5” (with HDD cage) and two 5.25” devices into the build at the same time.

Superior Ventilation

Featuring a width of 236mm, the Core V51 TG enables users to build a complete high-end system that supports up to three 140mm case fan or up to one 420mm liquid cooling radiator. Additionally, to improve system ventilation, the Core V51 TG comes with three 120mm fans (two at the front and one at the rear).

Schematic Fan Setup
                               Schematic Fan Setup

Specifications:

P/NCA-1C6-00M1WN-03
Case TypeMid Tower
Dimension (H x W x D)540 x 236 x 560 mm
(21.3 x 9.3 x 22 inch)
Net Weight12.3 kg
Side PanelTempered Glass x 1
ColorExterior & Interior : Black
MaterialSPCC
Cooling SystemFront (intake) :
120 x 120 x 25 mm Turbo fan (1000rpm, 16dBA) x 2
Rear (exhaust) :
120 x 120 x 25 mm Turbo fan (1000rpm, 16dBA)
Drive Bays-Accessible
2 x 5.25’’
-Hidden
5 x 3.5’’ or 5 x 2.5’’
Expansion Slots8
Motherboards6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX),
12” x 9.6” (ATX), 12” x 13” (Extend ATX)
I/O PortUSB 3.0 x 2, HD Audio x 1
PSUStandard PS2 PSU (optional)
LCS UpgradableSupports 1/2”、3/8”、1/4” water tube
Fan SupportFront:
1 x 120mm or 2 x 120mm or 3 x 120mm
1 x 140mm or 2 x 140mm
1 x 200mm
Top:
1 x 120mm or 2 x 120mm or 3 x 120mm
1 x 140mm or 2 x 140mm or 3 x 140mm
1 x 200mm or 2 x 200mm
Rear:
1 x 120mm or 1 x 140mm
Bottom:
1 x 120mm or 2 x 120mm
Radiator SupportFront:
1 x 120mm or 1 x 240mm or 1 x 360mm
1 x 140mm or 1 x 280mm or 1 x 420mm
Top:
1 x 120mm or 1 x 240mm or 1 x 360mm
1 x 140mm or 1 x 280mm or 1 x 420mm
Rear:
1 x 120mm
Bottom:
1 x 120mm or 1 x 240mm
ClearanceCPU cooler height limitation: 185mm
VGA length limitation: 310mm(with HDD rack)
480mm(without HDD rack)
PSU length limitation: 220mm (With Bottom Fan)

Suppressor F51 Tempered Glass Edition Mid-Tower Chassis:

mainf51

4mm Thick Tempered Glass Window with Gorgeous View

The tempered glass features 4mm thickness that guarantees the durability of the window. Moreover, the enlarged window design delivers excellent viewing capability, permitting users to fully display every interior component of the system and show off their dedication and skill set.

Fully Modular Concept

The fully modular drive cages provide the ease of installation/removal and maximize the interior space for the custom cooling loop. Especially, the tool-less drive bay design allows users to freely interchange the 3.5” and 2.5” hard-drives to suit their particular needs. Plus, the modular drive bay concept of “2+6+2” offers a good ratio for accessories and storage devices.

Riser GPU Support Bracket

Specially designed with dual GPU placement, the Suppressor F51 TG has the support for vertical graphic card layout with dual PCI-E slots design. The included riser GPU support bracket not only can prevent the graphic card from sagging, but also helps to reduce the weight on the motherboard. The PCI-e riser cable is optional.

Schematic Radiator Setup
                     Schematic Radiator Setup

 Outstanding Expandability

The Suppressor F51 TG supports motherboards up to standard E-ATX, a tower CPU cooler with maximum height 185mm, and a dual expansion slot VGA of up to 465mm in length without HDD rack. Moreover, the Suppressor F51 TG has the ability to accommodate up to six 3.5”/2.5” (with HDD cage) and two 5.25” storage devices at the same time. Most importantly, the Suppressor F51 TG still leaves plenty of space for cable management even after installing a high-wattage PSU.

Advanced Ventilation

Featuring a width of 230mm, the Suppressor F51 TG enables users to build a complete high-end system that supports up to two 200mm case fan or up to one 420mm liquid cooling radiator. Additionally, the Suppressor F51 TG comes with one 200mm front fan and one 140mm rear fan to provide efficient airflow for the system.

Schematic Fan Setup
                                          Schematic Fan Setup

 

Specification:

P/NCA-1E1-00M1WN-03
Case TypeMid Tower
Dimension (H x W x D)525 x 230 x 577 mm
(20.6 x 9.1 x 22.7 inch)
Net Weight13.7 kg / 30.2 lb
Side PanelTemped Glass
ColorExterior & Interior : Black
MaterialSPCC
Cooling SystemFront (intake) :
200 x 200 x 30 mm fan (600~800rpm,13~15dBA)
Rear (exhaust) :
140 x 140 x 25 mm Turbo fan (1000rpm, 16dBA)
Drive Bays-Accessible
-Hidden
2 x 5.25’’
6 x 3.5’’ or 2.5’’ (HDD Cage)
2 x 2.5’’ (With Power Cover)
Expansion Slots8
Motherboards6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX),
12” x 9.6” (ATX), 12” x 13” (Extend ATX)
I/O PortUSB 3.0 x 2, USB 2.0 x 2, HD Audio x 1
PSUStandard PS2 PSU (optional)
LCS UpgradableSupports 1/2”、3/8”、1/4” water tube
Fan SupportFront:
3 x 120mm , 2 x 140mm , 1 x 200mm
Top:
3 x 120mm , 3 x 140mm , 2 x 200mm
Rear:
1 x 120mm , 1 x 140mm
Bottom:
2 x 120mm
Radiator SupportFront:
1 x 360mm , 1 x 420mm
Top:
1 x 360mm , 1 x 420mm
Rear:
1 x 120mm
Bottom:
1 x 240mm
ClearanceCPU cooler height limitation:
185mm
VGA length limitation:
310mm(with HDD rack)
465mm(without HDD rack)
PSU length limitation:
220mm (With Bottom Fan)

 

Related posts