March 28, 2024

Custom builds in India never had a proper lift-off. While most users prefer to build their own PCs from scratch and not go the OEM route, the number of people actually building a showcase PC is very rare (read almost none). We do have talented modders and people who can dish out ideas, but somehow the co-ordination has never worked to fruition. Hence the idea of a proper build featuring high-end parts still remains a niche.

With that being said, when ASUS released their Z97 Sabertooth Mark S, a limited edition arctic camouflage themed Sabertooth board, there were a lot of hype worldwide for this board’s potential for a white themed build. Color co-ordination is one of the most important things to consider in a show-build, since more and more users are leaning towards aesthetics with performance. I did express my excitement in my review of the Mark S, and a few weeks later the concept of Snow Lion was born by the man in the middle, Sanjib Ray, a good friend of mine and someone who has been associated with a lot of builds before, helping and mentoring out others as well. He was particularly suitable for this job, and his latest purchase – the white Corsair Graphite 780T meant that we had two of the major components covered.

There were a lot of design changes involved, a lot of manual work involved and in the end what resulted was an absolutely fantastic and probably India’s finest fully-customized showcase computer build. So without further ado, let me share the experience, in Sanjib’s own words. Here’s the build log of Project Snow Lion, featuring ASUS and Kingston HyperX. The details have been arranged chronologically to give an idea of the challenges faced and the amount of detailing involved.

DSC_4104

Date: 11-03-2015

Hi, to start with this is all about a new build… and am starting this right from the scratch how things really took shape.

The basic idea started with the ASUS Sabertooth Mark S, the arctic camo themed motherboard that they released a few months back. I had a few Sabertooth motherboards before (P67/Z77) and this one looked like the ‘one’. Then luckily I got my hands on a Corsair 780T white edition and thought to myself ‘Hey, why not a white themed build?

When I reached out to Asus India with my plan, they responded by agreeing to be the sponsor for this build. Apart from the centrepiece Z97 Sabertooth Mark S, they will also be sending me the GPU for this build – the Asus GTX 980 matrix Platinum

But first thing that came to my mind was that an all-white build may not look that attractive after all. Being from a design background myself, I started to think in a different way. I thought that to make it more beautiful I should have contrasting colours around it. Black was an obvious choice, and I also chose grey since it went well with the entire arctic-camo theme.

So to make the build I choose three colours-
· The base platform to be White
· Black
· And Grey or silver to break and neutralize everything.

Why snow Lion:

Snow Lions are elusive, powerful creatures. The rarity of them seen in the wild has made them somewhat mythical. I wanted that aura associated with this build – a sense of power, a sense of rarity, and a sense of beauty – all mixed into one.

Logo:

For the logo, however, I wanted the lion, not the snow lion. The lion’s manes always gave an impression of its power, so I initially drew three logos.

 

snowlion1

After a bit of thinking and positioning, I chose this one to be the final logo for the build.

snowlion2

 

Date: 23-03-2015

The basic plan:

The Corsair 780T can house one 360 mm. radiator on top, one 360 mm radiator at the front and a 240 mm Radiator at the bottom.

For this build I will be using a single Black Ice GTX 360 Gen 2.0 Extreme radiator. It is 54 mm thick and can be easily held on top of the 780T with push/pull.

The HDD bays are placed in the stock position; they can be removed and adjusted. But instead of 2 HDD bays i decided to go with one as a single bay can host around 4 HDDs and there is a nice setup on the back to mount 3 SSDs. This will also help in uninterrupted airflow from the front.

To highlight the motherboard, the colour inside the cabinet is kept black, with white paint job on some parts.

I am also adding in some covers- PSU cover, a cover for the front replacing the stock black mesh, and a cover for the top replacing the top mesh.

snowlion2 snowlion3 snowlion4 snowlion5 snowlion7

There are markings for the 120 mm and 140 mm fans on top to help in mounting the fans. Let’s look at some pictures of the stuff that I am using:

The Black ICE GTX Gen two xtreme 360 radiator

snowlion8 snowlion9 snowlion10

Fans:

Fans in my collection:

3 pcs SP120 High Performance edition fans of 2350 rpm
4 pcs Noise blocker Ultra silent xlp- 120mm fans of 2000 rpm
3 pcs Swiftec Helix [the stock fans that comes with the H320]
3 pcs Corsair SP120L of 2700 rpm

snowlion11 snowlion12 snowlion13 snowlion14

Airflow:

Three 120 mm fans will be pushing cold air into the cabinet, preferably- SP120 High Performance edition fans of 2350 rpm.

A single 140 mm white LED stock corsair fan at the back as an exhaust.

Lastly, three 120 mm fans below the radiator mounted on top of the cabinet to push the air through the radiator- preferably- Helix 120 mm or corsair SP120 high performance edition fans or Noise blocker 120 mm fans will be used for this purpose.

If needed i can also get 3 Silverstone SST AP121 white air penetrator 120 mm fans.

Looking forward for suggestions on the airflow and placement of the fans.

Some camera work with fittings:

snowlion15 snowlion17 snowlion18 snowlion19 snowlion20

Tube reservoir:

snowlion21 snowlion22

Date: 24-03-2015

Thanks a lot guys, looking forward for some useful suggestions also…. and the post continues

Some try outs with the fans:

Aerocool DS Dead Silence Fan, the design of the fan is so cool that I couldn’t ignore it but I cant get my hands on to those lovely looking fans, so thought of transforming the cool design in the Sp120s that i have. First i tried out with some reflective vinyls. These vinyl is mainly used for road signage, as with mild lights on them they seem to be glowing, and they have a fine octagonal mesh kind of look on them.

here are some pictures.

Snowlion1 snowlion21 snowlion22 snowlion23 snowlion24

With black marker pen tried to draw the curved lines that is going to give the Ring effect when the fan will be running.

snowlion25 snowlion26 snowlion27 snowlion28

The fans looking fine, spinning perfectly without any noise and RPM drops. Now to check them on the radiator how well the sticker stays on the blades. As i have found some of the corners of the vinyl is peeling off as the vinyl is thick and a bit hard. If this thing doesn’t stays on the blade then will have to look for some other alternatives.

Date: 28-03-2015

The vinyl stickers started falling from the blades, so replaced it with simple sticker paper, they are thin and quite sticky.

From the vinyl stickers I got the proper measurements of the blades and as per that I draw the rounds and took printouts on the sticker and it went quite good so started with the painting of the body and the final fabrication of the blades. First masking the electrical part with tape and the removal of the rubbers from all the four corners:

snowlion29

And the rings:

snowlion30

Spray cans for the paint job:

snowlion31

After the first coat of white matte paint:

snowlion32

The final body of the fan after 3 coats of paint:

snowlion33 snowlion34 snowlion35 snowlion36 snowlion37

The new Stickers are ready:
snowlion40

Now the Blades:

snowlion41 snowlion43 snowlion44 snowlion45

So to check how it’s gone a look and any noise or friction of the stickers with the body, while spinning:

snowlion46

As everything went well and the sticker was also staying on the blade, so started mounting the fans:

snowlion47

All three fans in Line:

snowlion48

Date: 30-04-2015

Sorry for the long gap, as I was a bit busy with my father, as he was hospitalized. Now he is back home and the post continues.

It’s time for some PSU cables sleeving, maintaining the colours of the build… the white, grey and black.. But as ASUS  India has sent me a GTX 980 matrix platinum I have to include the red colour also in this list.

For cable sleeving am using Pre-sleeved cables, with black male and female connectors, here is what i have tried to do and this is how it looks:

snowlion49 snowlion50 snowlion51 snowlion53 snowlion54 snowlion55 snowlion56 snowlion57 snowlion58

Date: 13-05-2015

Now it’s time for the surprises from ASUS India.

The much awaited Sabertooth Z97 mark S:

snowlion59

After the usual unboxing, I couldn’t resist myself from putting the XSPC CPU block with white painted plate and screw on it, to check how it’s gone a look.

snowlion60

Now it’s time to uncover the beast:
snowlion62

In the meantime Paint jobs for some parts and accessories:

snowlion63 snowlion64 snowlion65

To check how it’s going to look:

snowlion66 snowlion67

Date: 14-05-2015

RAMs – Thanks Kingston India for the memory kits:

snowlion68 snowlion69

Here comes the thanks giving label for SnowLion:

Date: 21-05-2015

the GTX 980 matrix platinum… it comes with the usual ROG colour combination…red and black…so for this a red coloured sleevings have been added to the usual black and white combination…but the GPU needed a little bit of white impression also…to make it a part of this build… The ROG logo was white and the red streaks really looked awesome, so following that just tried to add some white streaks and the result is as follows…. some white vinyls on the cover and a honey comb design vinyl with matte lamination for back plate.

snowlion70 snowlion71

Date: 23-05-2015

It’s time for some fun with acrylic sheets. I planned to put the 3 SP120 fans on front and to show the white stickers on it, i need a transparent cover for it, so acrylic sheet comes as the first choice, made a honey comb design and then went for the laser cutting for the perfect finish. This was my first time with the laser cutting workshop so had some issues with the files, so did a basic try out and here is the outcome.

The front panel:

snowlion72

The TUF logo:

snowlion73

The outcome:

snowlion74

A logo for the top mesh of the cabinet and some light effects on the Front acrylic panel:

snowlion75

Date: 25-05-2015

Now it’s time for the pics of some try-outs that I have done inside with some acrylic, to start with:

A PSU cover- an acrylic sheet of 4 mm with a matte lamination on it, used the Matte lamination to diffuse the visibility of the things under it, but still to get a hint of the light under it.

snowlion76

For the tubing, I got some acrylic tubes with G1/4 thread on both ends, so with both side male adapters i started using them with the help of some XSPC 45 degree adapters and a bit of flexible white tubes where it was not easy to mount the acrylic tubes.

First I started the loop like from the tube reservoir the pump taking the water and pushing it straight to the CPU block and then from CPU block moving to the Radiator and from Radiator going to the Reservoir.

snowlion77

The Tube going to the CPU block was straight, but the tube coming out from the CPU block was at 45 degree. So in the next try-out I changed the direction of the tube carrying water to the CPU block from 90 to 45 degree to match the other tube, and here it how it looked.

snowlion78

To maintain proper air pressure for the radiator I shifted the SP120s from the front and put them inside the cabinet, pushing air thru the radiator, and have put 2 corsair AP fans on top to pull the air through the radiator. And planned to put to 140 mm LED fans on the front as intake… so this lead to rework on the front panel acrylic design. And this is what I did to the front panel.

snowlion79

Date: 21-07-2015

Hi, sorry for the long gap in updating the Build log due to some unavoidable circumstances.

After the completion with some new additions to the build here are the pictures, looking forward to the valued feedbacks, thanks in advance.
snowlion81 snowlion82 snowlion84 snowlion85 snowlion86 snowlion87

After the Snowy effects…. hoping it may become monotonous so added a RGB strip with controller to slowly change the colours … here are some pictures of how it looks. In different colours.

snowlion88 snowlion89 snowlion90
snowlion92

Conclusion:

So in conclusion, after witnessing this fantastic build take shape, I felt humbled by its fit and finish. I have been closely monitoring this build and going through the painstaking processes involved with creating SnowLion from scratch, it was an opportunity to look beyond normal ideas and see what can be achieved once you had an idea and wasn’t ready to compromise on it. In the end, I had an awesome time being involved (albeit in a passive way, Sanjib did most of the work) and now would look forward to many more such examples. If nothing, SnowLion is a beginning – for far greater things to come.

You can find/follow Sanjib Ray in Facebook.